Go to the content


 Go back to Planet Debian
Full screen Suggest an article

Joey Hess: custom ARM disk image generation with propellor

November 19, 2017 19:51 , by Planet Debian - 0no comments yet | No one following this article yet.
Viewed 24 times

Following up on propelling disk images, Propellor can now build custom ARM disk images for a variety of different ARM boards. The disk image build can run on a powerful laptop or server, so it's super fast and easy compared with manually installing Debian on an ARM board.

Here's a simple propellor config for a Olimex LIME board, with ssh access and a root password:

lime :: Host
lime = host "lime.example.com" $ props
    & osDebian Unstable ARMHF
    & Machine.olimex_A10_OLinuXino_LIME
    & hasPartiton (partition EXT4 `mountedAt` "/" `setSize` MegaBytes 8192)
        & hasPassword (User "root")
        & Ssh.installed
    & Ssh.permitRootLogin (RootLogin True)

To make a disk image for that board, I only have to add this property to my laptop:

& imageBuiltFor lime
    (RawDiskImage "/srv/lime.img")
    (Debootstrapped mempty)

Propellor knows what kernel to install and how to make the image bootable for a bunch of ARM boards, including the Olimex LIME, the SheevaPlug, Banana Pi, and CubieTruck.

To build the disk image targeting ARM, propellor uses qemu. So it's helpful that, after the first build, propellor incrementally updates disk images, quite quickly and efficiently.

Once the board has the image installed, you can run propellor on it to further maintain it, and if there's a hardware problem, you can quickly replace it with an updated image.

computer tower that I will be maintaining with propellor

It's fairly simple to teach propellor about other ARM boards, so it should be quite easy to keep propellor knowing about all ARM boards supported by Debian (and other distros). Here's how I taught it about the Olimex LIME:

olimex_A10_OLinuXino_LIME :: Property (HasInfo + DebianLike)
olimex_A10_OLinuXino_LIME = FlashKernel.installed "Olimex A10-OLinuXino-LIME"
    `requires` sunixi "A10-OLinuXino-Lime"
    `requires` armmp

My home server is a CubieTruck which serves as a wireless access point, solar panel data collector, and git-annex autobuilder. It's deployed from a disk image built by propellor, using this config. I've been involved with building disk image for ARM boards for a long time -- it was part of my job for five years -- and this is the first time I've been entirely happy with the process.

Source: http://joeyh.name/blog/entry/custom_ARM_disk_image_generation_with_propellor/

0no comments yet

Post a comment

The fields are mandatory.

If you are a registered user, you can login and be automatically recognized.